Moveable Transformer Oil Purification Machine 6000 L/hour Flow Rate
Application:
As is well known the Transformer plays an important role in the
generation, transmission and distribution of electrical energy.
Under load the transformer, dissipates heat and the insulating oil
acts as a coolant as well as an effective dielectric.
Due to the highly hygroscopic nature of the transformer oil, it
absorbs moisture from windings, which leads to gradual
deterioration of dielectric strength. Also there are some waste
impurities, gas contents in the transformer oil which destroy the
oil’s quality.
VPM Moveable Vacuum Transformer Oil Purifier is developed for
transformer oil degasification, dehydration and filtration
processing on site at outside.Being able to remove water and gas
fast and effectively under high vacuum and high speed operation
status,drying the insulating oil very well, improve the breakdown
voltage up to 70 KV quickly. Have a big improvement on the one time
purification result,reduce the dangerous of oil aging caused by
repeat heating on the ordinary oil purifier
The VPM system not only provides regular oil
purification/ reclamation such as degassing, drying and particulate removal, but
also can remove acidity, sludge, carbon deposits, sulfur, and other
soluble oil decay products and improve physical & chemical
properties comparable to new transformer oil.
Features:
▼ Doubles the evaporation area by adopting Huazheng horizontal
double vacuum separation technology efficiently and reliability
thorough removal of gas in the oil by using coalescing oil spray
separator.
▼ Adoption of American fine filter element, fineness: 5μm, ß≥1000
▼ Low noise and long life of the oil transport system
▼ Adoption of American heating technique with the way of thermal
radiation, constant temperature control.
▼ The use of float valve and photoelectric oil level control,
eliminates supervision
▼ Adoption of French de-foaming technique to avoid oil leaking
▼ Controlled digitally and automatically by PLC
▼ Major electric apparatus are imported from America, so the
controlling system safe and reliable
Technical Parameters:
| Model | VPM-100 |
| Capacity(L/min) | 100 |
| Vacuum level | -0.06～-0.099 Mpa |
| Working pressure | ≤ 0.4 Mpa |
| Temperature range | 20 ～ 80℃ |
| Filtering precision | ≤1 micron |
| Breakdown voltage | ≥ 75KV |
| Water content | ≤ 3ppm |
| Gas content | ≤ 0.1% |
| Filtering particles | ≥ 99.5% |
| Power supply | 380V, 50HZ, 3PH (or customized ) |
| Working noise | 65 dB |
| Heating power (kw) | 60 |
| Total power (kw) | 66 |
| Inlet/outlet(mm) | 50 |
| Purifier Weight (kg) | 900 |
| Trailer Weight (kg) | 500 |
Purifier Dimension (mm) | L | 1400 |
| W | 1150 |
| H | 1750 |
Trailer Dimension (mm) | L | 2800 |
| W | 1150 |
| H | 1200 |
Index Of Purified Oil:
| Breakdown voltage | ≥ 75KV |
| Water content | ≤ 3ppm |
| Gas content | ≤0.1% |
| Filtering particles | ≥99.5% |
| Particles size | ≤ 1 micron |
| Cleanness | ≤ Grade 6 (NAS) |
| Processing by regeneration device as following (Optional device) |
| Acid value | ≤ 0.03 mgKOH/g |
| Water-solubility | ≥ 5.4 PH |
| Flash point (close cup) | ≥ 135°C |
| Dielectric- factor loss | tgδ (90℃)% ≤ 0.005 |
