Mineral Oil Lube Oil Centrifugal Filtration Equipment Disc Type
3000 L/hour
Application:
The HCF centrifugal filtration is mainly used for remove the free
water and impurities from the oil,it can be applied to heavy diesel
oil, lubricating oil, transformer oil, hydraulic oil, turbine oil
clarification and purification to slow wear of diesel engine or
other types of machines, and extend the service life of the machine
and oil,also can be applied for some of vegetable oil,plant oil
which can’t dissolve in water and the density is lower than water,
such as peanut oil,palm oil,sunflower oil,turpentine oil etc.
Features:
1. Using high-speed disc centrifuge, separation more thoroughly.
2. Have self-discharging function,automatic trash, continuous and
efficient.
3. Using screw oil pump, lower noise, more stable performance.
4. PLC programmable controller, enabling unattended,the operation
is simple, safe and reliable.
5. Have integrated protection system (filter blocking alarm, motor
overload alarm, power fault phase, protection, over voltage and low
voltage protection etc.)
Description of HCF:
Disc type centrifuge separator can be used in two ways:
Liquid-Solid separation ( Suspension of low concentration), it is
called clarification operation.
liquid-liquid (or liquid-liquid-solid)separation (Suspension of
emulsion).
Disc centrifuge separator is compact design, small size, big
production. It is widely applied in chemical, pharmaceutical, light
industry, food, biological engineering, and transportation sectors
etc.
Disc centrifuge separator is vertical type. Drum is mounted on the
top of vertical shaft . High-speed revolution through the
transmission device driven by a motor. There is a folding disk
plate together inside the drum. There is a small gap between the
disc. Suspension (or emulsion) is injected the drum through a feed
pipe in the center of the drum.The solid particles or liquid
droplets forms sediment layer (or hydraulic) under the action of
centrifugal force when the suspension (or emulsion) through the
clearance between the discs. Sediment is sliding along the surface
of plate , gathering in the largest diameter of inside the drum.
Then the liquid is released from drum. The function of disc is to
shorten the setting distance of solid particulate or liquid,
increasing the setting area.
With disc in drum, which largely improve the production capacity.
The solid sediment will be removed manually or automatically.
Parameters:
| Index | Unit | HCF-3000A(auto type) |
| Flow Rate | L/H | 3000 |
| Separating factor | a/g | 8800 |
| Running speed | r/min | 8300 |
| Particles | μ | 1 |
| Water content | ppm | 50 |
| Maximum viscosity | cSt | ≤320 |
| Power Supply | | 380V, 50HZ, 3PH ( or Customized ) |
| Motor Power | kW | 8 |
| Heater Power | kW | 30 |
| Total Power | kW | 38 |
| Sludge-discharge | | Automatic |
| Outlet Pressure | MPa | ≤0.2 |
| Weight | Kgs | 950 |
| Dimension | mm | 1200*850*1100 |
Packaging & Delivery:
1. Prompt deliver at the very day.
2. Well-trained and disciplined packing team.
3. After-sale service:Any questions or problems after receiving the
product, please feel free to contact us. Problems would be solved
for you immediately.
4. Sophisticated and professional logistic agent.
