Auto Turbine Oil Filtration Machine / Oil Water Separator For
Marine Steam Turbine
Application:
Series TVP vacuum oil purifier is special designed for turbine oil,
lubricating oil and cooling oil to removing a large amount of
moisture and impurity. Such as power plants, power station steam
turbine in the process of running, moisture, dust and impurities
will be mixed in the turbine oil, will accelerate the oxidation of
oil, and changed with foam, fouling and oil sludge, cause the oil
emulsified serious, and lead to oil-water separation more
difficult, reduce the oil performance of lubrication, speed,
cooling etc. Meanwhile caused the metal parts of turbine steam to
corrosion, bad for the safe operation of steam turbine. So TVP
series machine is the special maintenance equipment for the power
plant, power station to clean the used turbine oil.
Features:
1) Turbine oil and water separator completely breaking the emulsion
by adopt vacuum technology, molecular absorption, vacuum drying,
automatically break emulsification technology.
2) Used unique ternary once dehydration method, not only remove
large amounts of water from oil, but also remove trace moisture
from oil, with high efficiency of dehydration and breaking the
emulsion, it can let the serious turbid emulsion oil become
transparent cleaning.
3) Filter can be washed and repeatedly use, it have long life and
need low cost. High-precision filter configuration can effectively
remove fine particulate impurities from the oil.
4) Turbine oil and water separator have adopt low-load design in
heater, ensured it can heat oil uniformly, can effectively prevent
cracking and aging hazards of oil.
5) Advanced electrical systems and automatic infrared oil control
system.
6) Turbine oil and water separator can unattended running with the
turbine or other equipment, low noise, it correspond the high
standard of world environmental protection requirements.
7) TVP turbine oil filter with the automatic drainage device can
drain continuously, it is easy operation and hommization.
8) If oil acid value is too high, you can choice BZ regeneration
device to mach TVP, reduce the acid value and dielectric loss,
after process, acid value ≤0.03(mgKOH/g), let quality indicator
meet the standard of "GB / T 7596-2008" the operation of turbine
oil quality standards ". it can demulsification, dehydration,
remove acid and impurities online, let the turbid emulsified
turbine oil become clear and transparent.
Technical specification:
| Model | TVP300 |
| Capacity(L/min) | 300 |
| Working vacuum | -0.06～-0.095 Mpa |
| Working pressure | ≤ 0.4 Mpa |
| Temperature range | 0-100℃ |
| Water content | ≤10 ppm |
| Gas content | ≤ 0.1% |
| Demulsifying value | ≤15min(GB/F7035) |
| Cleanness | NAS 6 grade |
| Filtering precision | ≤3 micron |
| Continuous work | 100 hr |
| No failure running | ≥5000 hr |
| Power supply | 380V, 50HZ, 3PH ( or Customized ) |
| Working noise | 65 dB |
| Heating power (kw) | 160 |
| Total power (kw) | 178 |
| Inlet/outlet(mm) | 65 |
| Weight (kg) | 1350 |
Dimension (mm) | L | 2000 |
| W | 1350 |
| H | 2100 |
Advantages:
It completely breaking the emulsion by adopt vacuum technology,
molecular absorption, vacuum drying, automatically break
emulsification technology. Used unique ternary once dehydration
method, not only remove large amounts of water from oil, but also
remove trace moisture from oil, with high efficiency of dehydration
and breaking the emulsion, it can let the serious turbid emulsion
oil become transparent cleaning. can be washed and repeatedly use,
it have long life and need low cost. High-precision filter
configuration can effectively remove fine particulate impurities
from the oil. It using a combination of strong wind and
water-cooled technology media condensing unit, condensing and
except water from high temperature and high fever mixed gas.
Relative Information:
1.Maintenance
1). check and adjust after oil purifier works for a period of time
A. all the electric control apparatus
B. temperature controller
C. oil seals and motor couplings
D. clean filter elements, check pumps and motors
E. all the pipes for leaking
2). Clean the motor and change the lubricating grease
3). Check and add specified lubricating oil to vacuum pump,
4). If oil purifier is not in use for one month or more, put it on
a dry, flat ground, close all valves and electric cabinet, cove the
whole machine with canvas
2.Customer Service
Installation
Commissioning
Complete Turnkey Applications
Spare parts
Service And Maintenance Schemes
Technical Support Network
Available Parts for customer option:
1. Fully closed-type for protecting oil purifier machine (weather
proof, vacuum proof, Waterproof, dust proof etc.)
2. Mobile trailer with enclosed type can move long distance working
in field.
3. Choosing different vacuum pump, oil pump and electric parts(such
as SCHNEIDER, SIEMENS, LEYBOLD,ABB etc.)
4. PLC controller for operation fully-automatically and explosion
proof materials
On-line Moisture detector, flow meter, viscosity tester, acidity
tester etc.
